pcb mounted uts hi seal: rugged & plastic pcb mounted uts hi seal: rugged & plastic uts hi seal with pc tail contacts wave soldering suitable pc tail contacts hold down clips for secure mechanical retention standoffs to ensure consistent height off pcb and to aid cleaning process ? jam nut & square fange receptacles with pc tail contacts were designed for applications in harsh environments where connectors are used in wet, corrosive and tight-space conditions. excellent corrosion resistance plastic connector > 500 hr salt spray ? leakage prevention when no cap ? ip68/69k mated / unmated uv-resistant 5 years of exposure without mechanical & visual degradation ? pre-assembled pc tail contacts stand-offs metal hold down clips (optional)
2 uts hi seal with pc tail contacts technical features mechanical ? housing & backshell : thermoplastic ul94-v0 ? insert: elastomer ? contacts: copper alloy - gold plated other platings on request ? endurance: 250 mating/unmating ? vibrations: sinusoidal vibrations per cei 60512-4 - from 10 to 2000 hz ? thermal shock : 5 cycles 30 min. from -40c to 105c per mil-std1344 method 1003 electrical ? current rating per contact max: - size 16: 13a - size 20: 7.5a ? insulation resistance: 5000 m? under 500vcc at 25c ? test potential: - 1500 veff between contacts size 20 - 2300 veff between contacts size 16 according to mil-dtl-26482 ? working voltage: - 600 v - contacts size 20 - 1000 v - contacts size 16 according to mil-dtl-26482 environmental ? temperature range:-40c to + 105c ? salt spray resistance: 500 hours ? sealing (mated/unmated): - dynamic ip68 - under water for 1 week, 1 bar - dynamic ip69k per din 40050 ? uv resistance: no mechanical degradation or important variation of color after 5 years of exposure in natural environment (equivalence exposure to sun and moisture as per iso4892) ? rohs compliant & conform to the chinese standard sj/t1166-2006 (chinese rohs equivalent) ordering information connector family u ts 7 - 8 d 2 p - - body variation 7 jam nut receptacle 0 square flange receptacle backshell no digit: no backshell shell size 8, 10, 12, 14, 18 contact type d = pc tail contacts insert arrangement see next page contact gender p = pin contacts s = socket contacts insert rotation no digit = normal w, x, y, z = different orientations specification no digit: standard version 32: version with hold down clips (only for jam nut receptacle)
3 uts hi seal with pc tail contacts 2 * please consult factory contacts : 6 ? 1 (#20) 6 98 contacts : 6 ? 1 (#20) 7 contacts : 7 ? 1 (#20) size 10 size 12 contacts : 2 ? 1.6 (#16) 3 contacts : 3 ? 1.6 (#16) 8 contacts : 8 ? 1 (#20) 10 contacts : 10 ? 1 (#20) 14 contacts : 14 ? 1 (#20) 5 size 14 12 contacts : 8 ? 1 (#20) 4 ? 1.6 (#16) 15 contacts : 14 ? 1 (#20) 1 ? 1.6 (#16) 18 contacts : 18 ? 1 (#20) 19 contacts : 19 ? 1 (#20) contacts : 5 ? 1.6 (#16) 11 contacts : 11 ? 1.6 (#16) size 18* 30 contacts : 29 ? 1 (#20) 1 ? 1.6 (#16) 32 contacts : 32 ? 1 (#20) contacts layouts size 8 2 3 contacts : 3 ? 1 (#20) contacts : 2 ? 1 (#20) 3a/98 contacts : 3 ? 1 (#20) 4 contacts : 4 ? 1 (#20) 33 contacts : 3 ? 1 (#20)
4 uts hi seal with pc tail contacts note : all dimensions are in mm shell sizes layouts angle in degrees w x y z 8 2 58 122 - - 3 60 210 - - 3a (98)* 60 210 - - 4 45 - - - 33 90 - - - 10 6 90 - - - 7* 90 - - - 98 90 180 240 270 12 3 - - 180 - 8 90 112 203 292 10 60 155 270 295 2 - - - - 14* 45 14 5 40 92 184 273 12 43 90 - - 15 17 110 155 234 18 15 90 180 270 19 30 165 315 - 18 11 62 119 241 340 32 85 138 222 265 30 180 193 285 350 insert orientation* normal w x y z * 8-98 layout, w and x non standard orientations / 10-7 & 12-14 layouts, w non standard orientation * insert rotated in body (viewed from front face of male insert) range presentation square fange receptacle with pcb contacts shell size ? a 0.15 b max. c 0.15 d max. e 0.25 f 0.25 i thread panel cut out male connector female connector a 0.25 ? b 0.1 8 11.9 11.7 2.3 21.5 21 15.1 9.76 / 11.86 (1) 10.78 / 13.09 (2) 9.55 / 11.71 (1) 10.82 / 12.79 (2) 7 / 16 28 unef-2a 15.1 12.5 10 14.9 23.8 18.3 10.98 / 13.39 10.82 / 12.79 9 / 16 24 unef-2a 18.3 15.1 12 18.95 26.2 20.6 9.76 / 11.86 (3) 10.98 / 13.39 9.55 / 11.71 (3) 10.82 / 12.79 11 / 16 24 unef-2a 20.6 18.2 14 22.15 28.6 23.0 10.98 / 13.39 10.82 / 12.79 13 / 16 20 unef-2a 23.0 21.4 18 please consult us (1) for layouts 8-2, 8-3, 8-4 / (2) for layouts 8-3a, 8-89, 8-33 / (3) for layout 12-14 a b c d e f e f 4 holes ? 3.20 0.1 thread ? 3.20 0.1 a a b i panel cut out
5 uts hi seal with pc tail contacts shell size ? a 0.15 b max. c max. panel thickness d max. f g h thread tightening torque (nm) panel cut out male connector female connector ? a 0.2 b 0.2 8 12.0 19.3 3.2 3.4 24.0 19.3 3.8 / 6.0 (1) 4.7 / 7.25 (2) 3.75 / 5.8 (1) 4.8 / 6.9 (2) 9 / 16 24 unef 2a 2 14.6 13.75 10 14.9 28.0 22.2 4.8 / 7.28 4.91 / 6.96 9 / 16 24 unef 2a 2 17.7 16.5 12 19.0 31.8 27.0 4.8 / 7 (3) 3.85 / 5.9 (4) 5.2 / 7 (3) 3.85 / 5.9 (4) 7 / 8 20 unef 2a 4 22.5 21.2 14 22.2 34.9 30.2 4.8 / 7 5.3 / 7 1 20 unef 2a 5 25.7 24.3 18 please consult us jam nut receptacle with pcb contacts & hold on clips jam nut receptacle with pcb contacts a b panel thickness c d g f a b panel cut out (1) for layouts 8-2, 8-3, 8-4 / (2) for layouts 8-3a, 8-98, 8-33 / (3) for layouts 12-3, 12-, 12-10 / (4) for layout 12-14 h ? 0.6 0.05 contact #20 ? 1 0.05 contact #16 thread tightening torque note : all dimensions are in mm (1) for layouts 8-2, 8-3, 8-4 / (2) for layouts 8-3a, 8-98, 8-33 / (3) for layouts 12-3, 12-, 12-10 / (4) for layout 12-14 shell size ? a 0.15 b max. c max. panel thickness d max. e 0.2 f g h thread tightening torque (nm) panel cut out male connector female connector ? a 0.2 b 0.2 8 12.0 19.3 3.2 3.4 4 24.0 19.3 3.8 / 6.0 (1) 4.7 / 7.25 (2) 3.75 / 5.8 (1) 4.8 / 6.9 (2) 9 / 16 24 unef 2a 2 14.6 13.75 10 14.9 28.0 22.2 4.8 / 7.28 4.91 / 6.96 9 / 16 24 unef 2a 2 17.7 16.5 12 19.0 31.8 27.0 4.8 / 7 (3) 3.85 / 5.9 (4) 5.2 / 7 (3) 3.85 / 5.9 (4) 7 / 8 20 unef 2a 4 22.5 21.2 14 22.2 34.9 30.2 4.8 / 7 5.3 / 7 1 20 unef 2a 5 25.7 24.3 18 please consult us a b d e hold down pin thread f g a b panel cut out h panel thickness c ? 0.6 0.05 contact #20 ? 1 0.05 contact #16
6 uts hi seal with pc tail contacts jam nut sealing caps part numbers shell size uts8dcg 8 uts10dcg 10 uts12dcg 12 uts14dcg 14 uts18dcg 18 part numbers shell size uts8dcgr 8 uts10dcgr 10 uts12dcgr 12 uts14dcgr 14 uts18dcgr 18 metal terminal* accessories part numbers shell size uts8dcge 8 uts10dcge 10 uts12dcge 12 uts14dcge 14 uts18dcge 18 square fange sealing cap metal terminal* colour coding rings part numbers shell size receptacles plugs uts710ccr* uts610ccr* 10 uts712ccr* uts612ccr* 12 uts714ccr* uts614ccr* 14 gasket part numbers / neoprene shell size utfd11b 8 utfd12b 10 utfd13b 12 utfd14b 14 utfd16b 18 * add g for green, y for yellow, r for red for shell sizes 8 & 18, please consult factory plastic protective cap part numbers shell size receptacle cap plug cap 8500-5585a 8500-5594 8 8500-5586a 8500-5595 10 8500-5587a 8500-5596 12 8500-5588a 8500-5597 14 8500-5590a 8500-5599 18 note : all dimensions are in mm
7 uts hi seal with pc tail contacts drilling patterns 12-10 12-8 10-98 12-2 10-7 10-6 8-3a/8-98 8-3 8-4 8-2 8-33 12-3 12-14 note : all dimensions are in mm
8 uts hi seal with pc tail contacts 14-5 14-15 14-12 18-11 18-32 14-18 14-19 18-30 for further information, visit our website www.souriau-industrial.com or contact us at contactindustry@souriau.com note : all dimensions are in mm windutshsp00301en ? copyright souriau september 2009 - all information in this document presents only general particulars and shall not form part of any contract. all rights reserved to souriau for changes without prior notifcation or public announcement. any duplication is prohibited, unless approved in writing.
sou r iau s.a.s 9 rue de la porte de buc 78000 versailles france - tel 01 30 84 77 99 - fax 01 30 84 15 30 ? active steering system ? leakage detection ? outdoor weather station ? robot ? road traffic management uts hi seal with pc tail contacts
|
